INSTA-SEAL
INSTANT LEAK SEALER
DESCRIPTION
INSTA-SEAL is a multi-purpose crack sealer and coating that adheres to most substrates. Contains a rapid curing synthetic elastomer with UV blocking materials. Coating is paintable and long-lasting. Once cured will help prevent rust and corrosion. Can be applied under wet conditions. Can be applied to painted surfaces. Designed for industrial, construction, HVAC, RV, marine, institutional use for maintenance of buildings, equipment, gutters, roofing repair. Flexible, won't crack or peel.
APPLICATIONS
Use to repair cracks and leaks in roofs, swamp cooler, drip pans, gutters, downspouts, flashing, PVC pipe, drywall, ductwork, pipes, hoses and similar repairs. Adheres to all surfaces such as wood, plastic, metal, brass, bronze, tile.
FEATURES & BENEFITS
• Dries quickly.
• Flexible.
• Prevents rust and corrosion.
• Paintable.
• Long-lasting.
SPECIFICATIONS
FORM: Solvent Based Aerosol 
FLASH POINT: >100°F
FLASH POINT: >100°FODOR: Moderate solvent FLAME EXTENSION: <18"
FLAME EXTENSION: <18"COLOR: Black/White/Grey SOLUBILITY IN WATER: N/A
SOLUBILITY IN WATER: N/ADETERGENCY: N/A SPECIFIC GRAVITY: 0.97
SPECIFIC GRAVITY: 0.97TOXICITY: 50 ppm OSHA PEL % VOLATILE BY VOLUME: N/A
% VOLATILE BY VOLUME: N/AWETTING ABILITY: N/A EVAPORATION RATE: Moderate
EVAPORATION RATE: ModeratePHOSPHATES: N/A BIODEGRADABLE: Yes
BIODEGRADABLE: YesSTORAGE STABILITY: 1 year + pH: N/A
pH: N/ACOLD STABILITY: 32°F PROPELLANT: Hydrocarbon
PROPELLANT: HydrocarbonLABEL INFORMATION
INSTA-SEAL is the instant leak sealer. Will seal leaks in gutters, roofs, roof flashings, ducting, PVC drains. Can be used to seal cracks in travel trailers and RV’s. Use for waterproofing, leak repair, drywall repair, repairing shingle roofs, filling cement cracks, repairing hoses. Apply along windows and around sinks as a sealer and waterproofer. Insta-Seal is a flexible elastomer coating that will provide up to 5 years of repair and protection. UV resistant, heat and cold resistant, stays flexible under stress caused by movement. Will not peel or crack under extremes of temperature. Dries quickly, is paintable once completely cured. Use in industrial plants, construction sites, HVAC service and repair, electrical contractors, building maintenance, RV maintenance, grounds maintenance, just about anywhere a crack or leak needs repair. Will help prevent rust and corrosion from spreading after use.
DIRECTIONS FOR USE:
Remove cap. Shake can well for 60 seconds after agitator ball rattles. Clean and dry surface prior to application. Hold can 6 to 8 inches away from surface to be repaired. Apply in short even strokes until thoroughly coated. Allow surface to dry for 15 minutes before use. Additional applications can be made to repair larger areas. Cleanup with paint thinner or mineral spirits. After use, can should be
turned upside down and sprayed to remove material from spray tip before storing. This will keep tip free of buildup.
CAUTION: Extremely Flammable. Contents under pressure. Keep out of the reach of children. Vapor Harmful. Avoid breathing of vapors or mist. Avoid contact with skin and eyes. Do not apply to energized equipment. Do not use near fire, sparks or open flame. Do not puncture or incinerate container. Exposure to temperatures above 120°F may cause bursting.
WARNING: This product contains chemical(s) known to the State of California to cause cancer.
CONTAINS (CAS#): Hydrocarbon Propellent (68476-86-8), Xylene (1330-20-7), Aromatic Hydrocarbon (108-88-3), Aliphatic Hydrocarbon (110-54-
3), Poly butadiene-co-styrene (9003-55-8).
PACKAGING INFORMATION
24 ounce cans 16 oz net weight.
